How the furnace working ?
The intermediate frequency melting furnace is mainly composed of a power supply, an furnace body with a induction coil and a crucible. Iron and steel will be put in the crucible built with refractory cement. After turned on power, an alternating magnetic field is generated in the induction coil, and then a induced eddy current is created to heat and melt iron and steel .
Furnace features:
1. Electricity fuel, various capacity 0.05T -10T, fast melting speed, 40-60 minutes /pot.
2. Low energy consumption. Induction melting is the most energy-saving melting method among electric melting furnaces.
3. Save raw material. Our furnace cause less burning loss. It can save at least 20-50 kilograms of steel raw materials per ton, compared with the gas, oil or coal-fired furnaces.
4. Reduce unqualified products by 1.5%. The application of a temperature control system can achieve precise temperature control to ensure the quality and capacity.
5. Environmental friendly. During working, there is no harmful gases and bright light created by furnaces, and workers will no longer be roasted and smoked by the coal stove under the scorching sun. It can meet the environmental requirements of govermment.
6. Easy to maintain,safe and stability.
Aluminum shell induction furnace
Aluminum shell furnaces are suitable for small foundry and semi-automatic fundry. Because aluminum shell furnace need amall space. They are easy to operate, they can be manual operation. Aluminum shell furnaces are more suitable for 50-2000kg hourly capacity.
1. Induction coils
Induction coil is the heart of aluminum shell furnaces. If its quality is poor, or its design is not reliable, it will cause up to 25% power loss. So it is very important to by a boog furnace with high quality induction coil. Our factory's induction coils are made of high-quality TUI oxygen-free copper., which are purchase from a Chinese brand-name company . The coil joint is wilded with high-silver to get high electrical conductivity and make less loss. Insulation material is set in the best inter-turn to get perfect insulation and high electrothermal efficiency.
2. Furnace frame
High quality furnace frame to have long service life. Our furnace's furnace frame is made of aluminum and magnesium alloy materials, consisting of two pieces of aluminum shells and asbestos board, insulating board and stainless copper wire rod. It is durable to furnaces are durable to service to 8-10 years.
3. Reducer
When finishing melting, the metal liquid will be poured by control reduer. RZS type reducer is a special reducer,used for induction furnace.The reducer has the advantages of small size, large speed ratio, self-locking transmission and low noise. It can be control by manual and electric control
4. Safety and big capacity. Our factory's furnaces are design bigger than its rated capacity. For example, 1 ton furnace's max capacity is 1.2 ton. So furnaces can still work smoothly when it is full. It is more safe as well. Some other furnaces supplier don't do that to save their production cost.
Power supply cabinet's features:
High quality components: Power supply cabinet is assembled by many electric components, and its quality can be influence by even a small spare parts. Our factory ues brand-name chinese spare parts to achieve steady quality. For example the thyristor is from TECHSEM, the Circuit Breaker is from CHINT , the capacitor is from Xinanjiang Power Capacitor Co.,Ltd and Shangyu Power Capacitor Co., Ltd.
Safety Protection:
• Main circuit short circuit protection
• Main circuit phase loss protection
• Main circuit phase fault protection
• SCR over-current protection
• SCR overvoltage protection
• Cooling water temperature protection
• Low water pressure protection
• Furnace leakage protection
• Intermediate frequency power failure protection
• Intermediate frequency electric furnace fault protection rate and increase the life obviously
scientify design: We pay attention to the practicality. The latested power supply cabinet have been the Five-gereration. They have been designed to be more easy to operate and more convenient to mainte.
One set display
Basic parts: 7 items, including power supply cabinet, melting furnace body, capacitor, reducer, water-cooling cables, tilting control device, crucible.
Customized parts: furnace-leak alarm, hydraulic device, dust collector, etc.
Optional parts: water cooling tower, refractory cement, ladles, generator, metal analyzer, etc.
Technical parameters of 500kg furnace
| |
Parameters |
unite |
data |
specification |
| Furnace body |
Rated capacity |
t |
0.5 |
iron steel liquid |
| Max capacity |
t |
0.6 |
iron steel liquid |
| Working temperature |
ºC |
1500 |
|
| Highest temperature |
ºC |
1800 |
|
| Transformer |
Transformer capacity |
KVA |
400 |
|
| Transformer primary voltage |
KV |
10 |
|
| Transformer secondary voltage |
V |
540 |
6 pulse, three-phase |
| IF power supply |
Rated power |
KW |
350 |
6 pulse, three-phase |
| Rated input current |
A |
560 |
|
| Rated input voltage |
V |
380 |
|
| IF voltage |
V |
750 |
|
| Startup success rate |
% |
100 |
|
| Rated working frequency |
KHz |
0.8 |
|
| Working noise |
db |
≤75 |
|
| Comprehensive parameters |
Melting rate(to 1100ºC) |
T/h |
0.5 |
The melting rate is influence by charging. |
| Power consumption(to 1100ºC) |
KW.h/T |
≤600 |
|
| Water cooling system |
Water circulation flow |
T/h |
35 |
|
| Water pressure |
Mpa |
0.25-0.35 |
|
| Input temperature |
ºC |
5-35 |
|
| Output temperature |
ºC |
<55< |
|
1) Equipment design
Furnace will be customized to meet your production needing and environmental condition (maximum ambient temperate, humidity, altitude,etc) .
2) Drawings delivery
Technical drawing will be send to the buyer after geting the deposite, so the buyer can build basic contruction before the furnace arrived.
3) Acceptance check before delivery
a. The supply of the inspection equipment complies with the scope of supply and technical specifications in the technical agreement.
b. Check the mechanical actions of the equipment.
c. Safety interlock of equipment and alarm function test.
4) Installation & debugging & worker training
a. Cooperate with guidance to check the buyer installation work;
b. Internal and electrical wiring connections between equipment;
c. Site commissioning;, according to the actual equipment adjust to the best state;
d. Direct buyer operating personnel to the correct use of operating equipment;
e. Guidance on site security considerations;
f. To guide the buyer maintenance personnel troubleshooting methods;
g. Provide equipment specification;
Why choose us ?
1.Equipped with built-in circulating water cooling system, equipment can be long-term work, no cleaning; will not be damaged furring electrical power components; so-ting long machine life;
Other manufacturers require users to directly tap water or groundwater cooling machine power; regularly with detergents water pipe cleaning equipment; and often because of poor water quality, so that equipment, furring channels, resulting in poor heat electrical components being blocked or damaged;
2.Configure automatic circuit breaker, with a reliable protection
Equipment power supply short circuit, open circuit, lack phase, power outages, discharge, and other circuit abnormalities are able to quickly and automatically cut off the power supply; in a timely manner to the equipment and network protection. To ensure the safety of the production operator.
Other manufacturers in general only with simple switch or without. They asked users to protect themselves with a fully functional power distribution equipment. Otherwise, there is short circuit, lack phase, or other circumstances occur. Will be because there is no protection, prone to accidents.
However, our equipments carry good protective function even without switch board prepared by the users.
3.One of the largest enterprises in the industry in Guangdong
We are devoted to independent R&D as well as production. A rich variety of finished products and half-finished products with complete specifications and spare parts enable us to realize fast delivery. In addition, the independent after-sales department will provide follow-up services regularly as to all the products. Furthermore, many of our engineers have been engaged in the industry for over 20 years while 80% of the intermediate-frequency equipment manufacturing companies had not yet been established15 years ago.
Audited Supplier 
){kind=link}
){kind=link}