Metal Smelting Furnace (GW-0.5T)
|FOB Price:||Get Latest Price|
|Min. Order:||1 Set|
|Production Capacity:||1000 Sets/Month|
|Transport Package:||International Export Packing Standard|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal|
- Model NO.: GW-0.5T
- Certification: CE ISO
- Feature 2: Producing If Furnace for Over 40 Years
- Feature 4: Fast Heating, Less Burning
- Feature 6: Constant Power Output
- Feature 8: Available for Fully Emptying of Solution
- Feature 10: Strict Quality Control
- Origin: China
- Type: Metal Melting Furnace
- Feature1: If Furnace Manufacturer
- Feature3: Can Melt Brass, Steel, Iron, Gold, Copper etc.
- Feature 5: Induction Heating
- Feature 7: Single or Two Furnace Bodies for Your Selection
- Feature 9: Conforming to Environmental Protection Requirement
- Trademark: Hengyang
- HS Code: 8514200090
This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy materials, as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
Performances and features
1. Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2. Fast smelting with low production cost; Low-pollution and environment-friendly.
3. A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material is easy to replace.
4. Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less, and metal components evenly.
5. Furnace shell using cast aluminum or steel structure, small footprint; Furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6. Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; Power supply system diagnostic error function, easy maintenance.
Compare to peer-factories, we have below outstanding advantages:
1. Equipped with built-in circulating water cooling system, equipment can be long-term work, no cleaning needed; Will not be damaged furring electrical power components; And lengthen the using life of whole machine.
Other manufacturers require users to cool down the machine with directly tap water or groundwater; Regularly clean the water pipe of equipment with detergents; And often because of poor water quality, the equipment, furring channels, resulting in poor heat electrical components being blocked or damaged.
2. Configure automatic circuit breaker, with a reliable protection
Equipment power supply short circuit, open circuit, lack phase, power outages, discharge, and other circuit abnormalities are able to quickly and automatically cut off the power supply; In a timely manner to the equipment and network protection, to ensure the safety of the production operator.
Other manufacturers may only with simple switch or without. They asked users to protect themselves with fully functional power distribution equipment. Otherwise, once short circuit, lack phase, or other circumstances occur, because there is no protection, lead to serious accidents.
However, our equipments carry good protective function even without switch board prepared by the users.
3. We are one of the largest enterprises in the industry in Guangdong
We are devoted to independent R&D as well as production. A rich variety of finished products and half-finished products with complete specifications and spare parts enable us to finish fast delivery. In addition, the independent after-sales department will provide follow-up services regularly as to all the products. Furthermore, many of our engineers have been engaged in the industry for over 20 years while 80% of the intermediate-frequency equipment manufacturing companies had not yet been established 15 years ago.
|Furnace Capacity||Rating Power||Input Voltage||Input Phase||Input Current||Assorted Transformer||Output Voltage||Output Frequency||Melting Time||Volume||Weight|
|GW-1T||600KW||380V 380V-2||3/6||960A 480A||600KVA 800KVA||750V 1300V||0.8KHZ||50-90Min||13m³||4500KG|
|GW-1.25T||800KW||380V 380V-2||3/6||1280A 640A||800KVA 1250KVA||750V 1300V||0.8KHZ||50-90Min||14m³||5000KG|
|GW-1.5T||1000KW||380V 380V-2||3/6||1600A 800A||1250KVA 1500KVA||750V 1300V||0.8KHZ||50-90Min||15m³||5500KG|
|GW-2T||1250KW||660V 380V-2||3/6||1120A 1000A||1500KVA 1800KVA||1300V||1300V||50-90Min||17m³||6000KG|
|GW-3T||1500KW||660V 380V-2||3/6||1350A 1200A||1800KVA 2000KVA||1300V||1300V||60-100Min||20m³||7000KG|
|GW-5T||2500KW||1000V 660V-2||3/6||2000A 1120A||3000KVA 3500KVA||1300V||1300V||60-100Min||23m³||8500KG|