Introduction and application
This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy material, as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
The basic structure of steel shell furnace: Two cylinder with thick wall seamless rectangular steel tube is welded into one structure,so it is more safer, more firm, more durable, and in high efficiency. The upper end of the induction furnace can be disassembled to facilitate the replacement of the coil.
Details display
- Hydraulic tilting. Furnace can rotate around the pouring spout, and tilting with proportional control, through controlling buttons of hydraulic station and the handle of tilting control device . Its tilting angle is vertically at 95 degrees and it can stay in any position in the process of rotating, as well as to change titling speed to more quicker or more slowly. It uses the manual valve operation and double machine double pump, with remote manual control system. Some other company only have single pump control.
- Energy saving. The sensor is enclosed with a magnetic yoke, covering an area is over 65%, so the leakage is small and achieve the maximum electrical efficiency. Compared with aluminum shell furnaces, steel shell furnace can save nearly 5% power consumption.
- Anti-fall protection device. During the process of tilting furnace, the anti-falling protective hood will be automatically raised to form a protective barrier to prevent the personnel from falling.
KGCL Power supply
1- Fault deteciton display Furnace is real time detected by the fault detection display. When faults are detected, such as short circuit of load, over-current, over-voltage, insufficient water pressure, high water temperature, and etc, it will be fed back to the control system which will cut off the power automatically, so it can prevent damage in advance. In addition, if there are any trouble of thyristor, compensation capacitor, voltage transformer and other components, it will automatically stop and light up the corresponding indicator.
2-high power factor The output power of variable frequency power supply can be arbitrarily adjusted in its rated range. The power factor is always more than 0.95, so it don't create higher harmonic, and have no pollution to the power grid.
Perfect internal water cooling system Thermometer and water pressure gauge are installed on each internal water flow branch, when the equipment is over temperature or over pressure, it will cut off the power supply and indicate;
A flow measuring deionization filter is used to keep the water flowing through the system at a small conductivity. The inlet and outlet of the filter are equipped with stop valves so as to replace the filter element.
All water separators inside the electric cabinet are made of copper and stainless steel to prevent rusting.
Remote console
If the power supply cabinet placed underground, it make it more convenient to control furnace by remote console. All meters and operation control devices are installed on the operation panel. The system state part of the two diagnostic touch screens is exactly the same as the power of the panel made by the host computer, which provides operators with detailed operation information at any time.
Why choose us ?
1.Equipped with built-in circulating water cooling system, equipment can be long-term work, no cleaning; will not be damaged furring electrical power components; so-ting long machine life;
Other manufacturers require users to directly tap water or groundwater cooling machine power; regularly with detergents water pipe cleaning equipment; and often because of poor water quality, so that equipment, furring channels, resulting in poor heat electrical components being blocked or damaged;
2.Configure automatic circuit breaker, with a reliable protection
Equipment power supply short circuit, open circuit, lack phase, power outages, discharge, and other circuit abnormalities are able to quickly and automatically cut off the power supply; in a timely manner to the equipment and network protection. To ensure the safety of the production operator.
Other manufacturers in general only with simple switch or without. They asked users to protect themselves with a fully functional power distribution equipment. Otherwise, there is short circuit, lack phase, or other circumstances occur. Will be because there is no protection, prone to accidents.
However, our equipments carry good protective function even without switch board prepared by the users.
3.One of the largest enterprises in the industry in Guangdong
We are devoted to independent R&D as well as production. A rich variety of finished products and half-finished products with complete specifications and spare parts enable us to realize fast delivery. In addition, the independent after-sales department will provide follow-up services regularly as to all the products. Furthermore, many of our engineers have been engaged in the industry for over 20 years while 80% of the intermediate-frequency equipment manufacturing companies had not yet been established15 years ago.
After sales service commitment
a. The purchased equipment to the buyer through life time maintenance services.
b. Ensure that implements preferential price for equipment spare parts
c.After receiving the user fault notification shall respond within 2 hours, arrive at the scene within 24 hours traffic permitting, and remove specific weekday failure to resume production.
d. Our company after sales service up to 25 engineer, the major provinces and cities and regions across the country are equipped with after-sales service network
Audited Supplier 
){kind=link}
){kind=link}