Introduction and Application
This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy materials, as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
Saving Features
As the heating temperature fast, so very little oxidation, oxidation frequency heating forging burning only 0.5%, gas furnace heating oxidation loss of 2%, 3% of coal-fired furnace, intermediate frequency heating technology and materials, each ton forgings and burning stove saves at least compared to 20-50 kg of steel materials. Its material utilization up to 95%. Since the heating uniform heating, the temperature difference between the minimum core table, so in terms of forging also greatly increases the life of forging dies, forging surface roughness is less than 50um saving technology, frequency heating oil heating proportion of 31.5% ~ 54.3% energy saving, gas heating energy than 5% to 40%. Good heating quality, reduce scrap 1.5%, increase productivity by 10% to 30%, extend tool life by 10% to 15%.
Environmental Features
Working environment is superior, to improve the working environment of workers and the company's image, no pollution, low energyInduction furnace and stove,, workers will no longer be compared to the hot sun baked and smoked coal stove, but can reach the targets environmental protection departments, while the external image of the company and establish a future with the forging industry trends.
| Capacity |
Rated power |
Output Frequency |
Cast steel melting (1650ºC) |
Cast copper melting(1350ºC) |
| (t/h) |
(Kw) |
KHZ |
Melting |
Power consumption |
Melting |
Power consumption |
| |
|
|
Rate(t/h) |
(kw.h/t) |
Rate(t/h) |
(kw.h/t) |
| 0.1 |
100 |
2.5 |
0.1 |
800 |
0.1 |
490 |
| 0.15 |
160 |
2.5 |
0.15 |
750 |
0.15 |
480 |
| 0.35 |
250 |
2.5 |
0.35 |
700 |
0.35 |
460 |
| 0.5 |
350 |
1 |
0.5 |
650 |
0.5 |
450 |
| 0.75 |
500 |
1 |
0.75 |
630 |
0.75 |
440 |
| 1 |
750 |
1 |
1 |
600 |
1 |
430 |
| 1.5 |
1000 |
1 |
1.5 |
580 |
1.5 |
430 |
| 2 |
1500 |
1 |
2 |
560 |
2 |
430 |
| 3 |
2000 |
1 |
3 |
530 |
3 |
430 |
| 5 |
2500 |
1 |
5 |
520 |
5 |
430 |
| 8 |
5000 |
0.5 |
8 |
520 |
8 |
430 |
| 10 |
5000 |
0.5 |
10 |
520 |
10 |
430 |
| 15 |
8000 |
0.5 |
15 |
520 |
15 |
430 |
| 20 |
10000 |
0.5 |
20 |
520 |
20 |
430 |
| 30 |
15000 |
0.5 |
30 |
520 |
30 |
430 |
Safety Protection:
• Main circuit short circuit protection
• Main circuit phase loss protection
• Main circuit phase fault protection
• SCR over-current protection
• SCR overvoltage protection
• Cooling water temperature protection
• Low water pressure protection
• Furnace leakage protection
• Intermediate frequency power failure protection
• Intermediate frequency electric furnace fault protection rate and increase the life obviously
Why Choose us?
1,Low power consumption
Large current system made of pure copper as conductive medium, the whole circuit with less resistance. Electrode arm shaped as copper-clad box type, resistance and heat can be reduced efficiently. Reasonable arrange of all conductive systems to minimize the resistance of every circuit.
2,Safety & Stability
Full set of hydraulic driving system equipped with accumulator to ensure stability of facilities in the operation process. Whist, equipments can go on the motion when there any emergency accidents happen.
3,High Power Factor
Our power factory could reach over 98%, which could greatly reduce the capacitor box quantities. However we still equip enough capacitor box quantities, which mean your furnace is much much more efficient.
4.High flexibility & Maximum simplicity of operation
HMI used in electrical automation control, interface simulates the real form of furnace, which make the operation more convenient. Mixing feedstock, charging feedstock, melting, tapping all the commands can be implemented by computer.
5.More Durable
We get 6 thyristors on the left, 8 on the right, so even if one thyristor is damaged, our furnace still could be continued use. But many other factories only get only 4 on the right,the whole equipment cannot be used anymore when one thyristor is damaged.
After-sales service:
a. Cooperate with guidance to check the buyer installation work;
b. Internal and electrical wiring connections between equipment;
c. Site commissioning;, according to the actual equipment adjust to the best state;
d. Direct buyer operating personnel to the correct use of operating equipment;
e. Guidance on site security considerations;
f. To guide the buyer maintenance personnel troubleshooting methods;
g. Provide equipment specification;
FAQ:
Q1: Our workers are not professional on the induction furnaces, how can we solve that?
A1:Don't worry, when the induction furnaces arrive at the clients' plant, our engineer will go and assist in installation, commission, and training until the workers can operate by themselves.
Q2:Which kind of power supply do you supply? Electricity or gas?
A2:The power supply we provide is electricity.
Q3:What about your package? If damages happen, how do you solve?
A3:We take container loading, wire fixing. If damages occur, we will send the spare parts for you.
Q4: Is it all right to make customer's own brand name?
A4: Sure, with your authorization of brand. We accept OEM service.
Q5: How do you control the quality?
A5: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.
Q6: How long is your delivery time?
A6: Generally it is 7-14 days if the parts are in stock. or it is 30-45 days if the parts are not in stock, it is according to quantity.
Audited Supplier 
){kind=link}