500kg Cast Iron Melting Furnace for Foundry

• Customization: Available
• Customized: Customized
• Condition: New
• Model NO.: GW-0.5T
• Power Source: Electric
• Automatic Grade: Automatic
• Type: Iron-Making Equipment
• Certification: ISO, CE
• Application: Cast Iron Melting Furnace
• Furnace Capaicity: 500kg
• Melting Rate: 500kg Iron/Hour
• Rated Power: 350kw
• Rated Frequency: 50Hz
• Rated Voltage: 380V, 3phase
• Input Current: 560A
• Transformer Capacity: 400kVA
• Working Temperature: 0-1500 Degrees (for Iron)
• Cooling Way: Water Cooling System
• Warranty: 1 Year at Least
• Installation Guiding: Yes
• Contruction Drawing: Yes
• Delivery Time: About 20 Days
• Associate Product: Cooling Tower, Lining Material, Crucible
• Transport Package: Export Plywood Box
• Specification: 1650*1320*1160mm
• Trademark: Hengyang
• Origin: China
• HS Code: 8514200090
• Production Capacity: 500 Sets/Years

Product Description

Application: Intermediate frequency electric furnace is widely apply in melting non-ferrous and ferrous metal. Such as carbon steel, alloy steel, special steel, iron, copper and aluminum, etc.
For product: Ingots, steel rebar, steel billet, iron powder, auto parts, brass statues, iron pots or manhole covers, etc.

Working principle: The intermediate frequency melting furnace is mainly composed of a power supply, an furnace body with a induction coil and a crucible. Melting metal will be put in the crucible built with refractory materials. The metal is put in the crucible. After the AC power is turned on, an alternating magnetic field is generated in the induction coil. Being cut by the magnetic line of force , the metal material generates an induced electromotive force, and it creates a induced eddy current to heat and melt metal. During the heating and melting process,  the temperature of the induction coil keep same as the surrounding temperature, and there is no harmful gases and bright light to pollute the environment. Melting speed can be controlled by adjusting the frequency and current through the power cabinet.

 

 

Main Models of Induction Furnace
Aluminum shell furnaces  are more suitable for 50-2000kg hourly capacity, so they are suitable for small foundry and semi-automatic fundry.

Equipment Type	Power input				Power Output				Melting time	Electricity consumption  per ton of material (KW)
(Furnace capacity)	(three-phase four-wire 50/60HZ)								(Minutes)
	Equipment power	Incoming  line voltage	Into the  line current	Matching  transformer	DC current	DC voltage	IF voltage	IF frequency		Steel	Copper	Aluminum
	(kw)	(V)	(A)		(A)	(V)	(V)	(Khz)
GW--0.05T	50	380	80	50	100	500	750	1	20-40	750	510	650
GW--0.1T	100	380	160	100	200	500	750	1	20-40	700	510	640
GW--0.15T	160	380	256	200	320	500	750	1	20-40	650	500	630
GW--0.25T	200	380	320	250	400	500	750	1	20-45	650	500	610
GW--0.35T	250	380	400	315	500	500	750	1	20-45	650	490	600
GW--0.5T	350	380	560	400	700	500	750	0.8	30-50	630	480	570
GW--0.75T	500	380	800	630	1000	500	750	0.8	40-50	620	470	560
GW--1T	800	380	1280	1000	1600	500	750	0.7	40-50	620	460	550
		750	656	1000	808	990	1480
GW--1.5T	1000	380	800	1250	1000	500	750	0.7	40-60	600	450	540
		750	820	1250	1010	990	1480
GW--2T	1400	750	1148	1800	1414	990	1480	0.5	45-60	600	440	530
		750	574	1800	707	990	1480
GW--3T	2000	750	820	2500	1010	990	1480	0.5	50-70	580	430	520
GW--5T	3000	950	1140	4000	1190	1260	1900	0.3	50-80	570	420	510
GW--10T	6000	950	2280	8000	2380	1260	1900	0.3	50-90	560	410	490
GW--15T	8000	950	1520	10000	1590	1260	1900	0.3	50-90	550	400	480
GW--20T	10000	950	1900	12500	1980	1260	1900	0.25	50-90	530	400	470
GW--30T	15000	950	2850	20000	2980	1260	1900	0.25	50-90	520	400

 

Sucessful cases

Our customers are mostly from Africa, Asia, and some countries in Europe and South America.
Countries from Africa, such as Egypt, Algeria, Ethiopia, Tanzania, Kenya, Uganda, Nigeria, Libya, Congo (Brazzaville), Congo (Kinshasa), Zambia, Zimbabwe, South Africa, etc.
Countries from Asia,such as China, Philippines, Vietnam, Mongolia, Malaysia, Thailand, Indonesia, Singapore, Bangladesh, Pakistan, South Korea, Kazakhstan, Uzbekistan, Kyrgyzstan, Afghanistan, Georgia, Armenia, Saudi Arabia, Jordan, Turkey, Iraq, Syria, Lebanon , United Arab Emirates (UAE), ect.
Countries from Europe, such as Belarus, Ukraine, Russia, ect.
Countries from South America, such as Ecuador, Colombia, Venezuela, Peru, Brazil,Chile, Argentina and Bolivia, ect.

 

Furnace features:

1. Long working life.  Furnace is made of aluminum and magnesium alloy materials, consisting of two pieces of aluminum shells and asbestos board, insulating board and stainless copper wire rod. It is durable to use for a long time.                                                                          
2. Safety.   The actual capacity of the furnace is greater than the rated capacity,  and the furnace is designed in a  good safety factor. So the furnace is stronger, can work smoothly when  the maximum load.                                                                                                                              
3. Tilting convinenently .   the furnace body is easy to turn over for pouring metal, and you could pouring metal through electric control or manual control.The tilt angle is 95 degrees at vertical.
                                      
4. Good quality reducer. RZS type reducer is a special reducer, mainly used for induction furnace. The reducer has the advantages of small size, large speed ratio, self-locking transmission and low noise.                                                                                                                                   
5. Good quality induction coil. Made of high-quality TUI oxygen-free copper of medium-alloy copper. The coil joint is made of high-silver welding, with high electrical conductivity and loss. Small, ensuring the best inter-turn insulation material, high insulation and high electrothermal efficiency.

   

    

   detail 1-aluminum shell

   ----aluminum and magnesium alloy material

   Aluminum shell is consisting of two pieces of aluminum shells and asbestos board, insulating board and stainless copper wire rod.

   
   detail 1-induction coil

     ---≥99.95% purity electrolytic copper 

   1. Made of original TUI oxygen-free copper from ZHONGLVLUOTON;

   2. Scientific and rational design, according to electromagnetic theory.

   3. High-silver welding, with high electrical conductivity and less loss. 

   4. The best inter-turn insulation material, high insulation and high electrothermal efficiency.

    

   

    

   Power supply cabinet
   
   Power supply cabinet is the most important part of melting furnace. We can supply you high quality power supply for 50kg to 30ton furnace. You will be benifit by our high quality products and good after-sale service.
    
   
    
   Power supply cabinet's features:
   
   High quality components: Power supply cabinet is assembled by many electric components, and its quality can be influence by even a small spare parts. Our factory ues brand-name chinese spare parts to achieve steady quality. For example the thyristor is from TECHSEM, the Circuit Breaker is from CHINT , the capacitor is from Xinanjiang Power Capacitor Co.,Ltd and Shangyu Power Capacitor Co., Ltd.
   
   
   
   scientify design: We pay attention to the practicality. The latested power supply cabinet have been the Five-gereration. They have been designed to be more easy to operate and more convenient to mainte.
    
    
   
    
   
   Technical Support

1) Equipment design
Furnace will be customized to meet your production needing and environmental condition (maximum ambient temperate, humidity, altitude,etc) .

2) Drawings delivery
 Technical drawing will be send to the buyer after geting the deposite, so the buyer can build basic contruction before the furnace arrived.

3) Acceptance check before delivery 
a. The supply of the inspection equipment complies with the scope of supply and technical specifications in the technical agreement.
b. Check the mechanical actions of the equipment.
c. Safety interlock of equipment and alarm function test.

4) Installation & debugging & worker training
a.  Cooperate with guidance to check the buyer installation work;
b.  Internal and electrical wiring connections between equipment;
c.  Site commissioning;, according to the actual equipment adjust to the best state;
d.  Direct buyer operating personnel to the correct use of operating equipment;
e.  Guidance on site security considerations;
f.  To guide the buyer maintenance personnel troubleshooting methods;
g.  Provide equipment specification;
 

 

 

Foshan Hengyang Furnace Manufacturing Co., Ltd 

Established in 1999, Foshan Hengyang Furnace Manufacturing Co., Ltd is located in Foshan city, Guangdong Province, China, where is 20km from Guangzhou Baiyun International airport, so it has advantages of convenient transportation. As a hi-tech private enterprise, Foshan Hengyang Furnace Manufacturing Co., Ltd is one of the leading Chinese manufacturers of medium frequency induction furnace.

• Have ofter-sale office abroad, and factory in Egypt.
• Exported to more than 30 countries and regions, such as  Egypt, Algeria, South Africa, Uzbekistan, Kazakhstan, Malaysia, Indonesia, Russia, Mecigo, Tanzania, Saudi Arabia, Sudan, Zimbabwe,  Korea, Vietuam, Bangladesh,USA, Portugal, Denmark, India, Pakistan, Iran, etc.